Welcome to Ampinvt !
Products
Partnership 
Contact 
Solar pump inverters, the beating heart of solar water pumping systems, play a crucial role in harnessing the sun’s energy to power submersible pumps. However, even these steadfast guardians can occasionally falter. This guide will delve into the labyrinth of common issues that can afflict 3-phase solar pump inverters and illuminate the path to troubleshooting success.
Low or No Output:
The absence of water flow can send shivers down the spines of irrigators and farmers alike. A lack of inverter output is often the culprit. Inspect the inverter’s display for error codes or flashing lights. Loose or disconnected wiring, faulty fuses, or an overheated inverter can disrupt its functionality.
Overvoltage/Undervoltage:
Solar panels generate DC voltage, which needs to be converted to AC voltage for the pump. When voltage levels fall outside the acceptable range, the inverter may shut down to protect against damage. Check the solar panel array for open or short circuits and ensure the inverter is sized appropriately for the solar system.
Overload:
If the pump draws too much current, the inverter may go into overload mode. This can occur due to a clogged pump, worn bearings, or low water levels. Reset the inverter and avoid operating the pump until the cause of the overload is identified and resolved.
Ground Fault:
Ground faults can arise from damage to the pump cable or the inverter itself. They cause the inverter to trip as a safety precaution. Investigate the cabling for nicks or breaks and check the inverter’s grounding system for proper connections.
Communication Issues:
Modern solar pump inverters are equipped with communication capabilities for monitoring and control. If the inverter fails to communicate, the problem may lie with the communication cable, the inverter’s software, or the receiving device. Ensure proper cable connections and update software if necessary.
Troubleshooting Tips:
Consult the inverter’s user manual for specific error codes and troubleshooting guidance.
Use a multimeter to check voltage and continuity at various points in the system.
Inspect wiring for loose connections, broken wires, or corrosion.
Ensure the solar array is free of debris and receiving adequate sunlight.
Seek professional assistance if the issue persists or involves complex repairs.
By utilizing these troubleshooting strategies, you can restore your 3-phase solar pump inverter to its former glory, ensuring a steady flow of water for your irrigation or water supply needs.
COMPANY
PRODUCTS